Kawasaki Z1000ST KZ1000ST 79-80 Stainless Reverse Cone Exhaust System

This Exhaust Fits

Frequently Asked Questions

• What is the downpipe outer diameter?
  The outer diameter is 32mm.
• What is the collector outlet outer diameter?
  The collector outlet where the silencer joins is 64mm o.d.
• What size are the header port gaskets?
  The header port gaskets are 41mm.
• Can I get to my sump nut and oil filter without removing the header pipes?
  Yes you can, our systems allow oil filter removal and sump nut access without removing the header pipes.
• Can I get replacement gaskets and springs?
  Yes we have all the spares in stock ready to go.
• How do I clean the headers?
  See fitting instructions section.
• Which end does the baffle come out?
  This silencer has a twin stage baffle that comes pre installed, You can remove the inner spark arrestor baffle with one allen key bolt for a little more note and less back pressure, or you can remove the inner cartridge to have the full drag pipe effect.
• Is this a loud silencer?
  Yes this can be moderate to loud on some engine configurations.
• Do you have a quieter baffle for this silencer?
  Not currently however the standard baffle it comes with does a pretty good job.
• Can you repack this silencer?
  No these are not repackable silencers however replacement internal cartridges are available.
• What is the inlet I.D of the silencer?
  Inlet I.D is 64mm and is a pretty standard size for most applications.
• What is this silencer made from?
  This is made from 304 stainless steel and is highly polished and has a brushed alloy end cap.
• How long do I allow the sealant to dry?
  We recommend you leave the sealant to cure for 24hrs before starting the bike.
• Where do I use the sealant?
  Use the sealant on every pipe to pipe join as this will help seal the system and prevent any exhaust gas leaks.